应用领域
应用领域
应用领域
SLF
Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.
点击查看更多
SLV
Stafsjö’s knife gate valves SLV and SLF are particularly suitable for abrasive and demanding slurry where operation reliability and low life cycle cost are emphasized. The SLV is a lugged version while the SLF is fully flanged and especially suitable on old non-centred pipes or low pressure applications.
点击查看更多
D2G
TStafsjö’s knife gate valve D2G is a bi-directional tight valve with full bore. The valve is equipped with two hard chromed gates that works towards each other in the bore, which gives an extremely fast operation. This shut-off performance along with its flow characteristics makes it suitable for contaminated media or reject handling. The valve should be mounted only in a vertical pipe line.
点击查看更多
RKO
Stafsjö’s knife gate valve RKO is reliable and particularly well suited for demanding reject and other abrasive media. The valve’s circular inlet and square outlet together with the gate, that has a rectangular shape and a bevel edge, counteracts clogging and blockages, which often is a problem in combination with junk traps, coarse reject and cleaners.
点击查看更多
HX
Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
点击查看更多
HPT
Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
点击查看更多
HP
Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding operating conditions with media as pulp (pulp concentration < 18%), liqour and highly concentrated slurry.
点击查看更多
XV
Stafsjö’s knife gate valve XV gives a secure and tight shut-off, independent of pressure direction. The valve has good flow characteristics and can be used in applications with pulp, biomass and sludge, and the Polyurethane seated version further extend its field of applications to abrasive media.
点击查看更多
MV
Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
点击查看更多
WB 14E
Stafsjö’s WB14E knife gate valve is a high performance shut-off valve with superior flow characteristics, offering bi-directional zero leakage shut-off up to 150 psi/10 bar. It is suitable for media such as pulp stock, chemicals, sludge, bio mass, slurry and water. The fully lugged body design is suitable for dead-end services.
点击查看更多
MV
Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
点击查看更多
EP 200
The positioner EP 200 is controlled by micro processor and is designed to operate and control single or double acting pneumaticactuators by means of an analog signal of 4-20 mA. It providesthe advanced functionality of latest positioners, e.g. Autostart for thedetermination of control parameters and easy operation on site.
点击查看更多
EP 100
The analog positioner EP 100 with input signal 4..20 mA serves to activate single or double acting pneumatic quarter turn actuators.The settings are carried out in a simple way via switches and potentiometers. In the version EP100-Option R it achieves the option travel indication.Position of the actuator is shown by an analog 4..20 mA signal.
点击查看更多
MV
Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
点击查看更多
MV
Stafsjö’s knife gate valve MV is used within many different fields of applications. The valve has a gate with a bevel edge that effectively cuts through different media. In closed position the gate is pushed onto the seat which gives a tight and reliable sealing. This special shut-off technique makes the MV valve suitable for both fluids and dry media such as pulp, sludge, biomass, powder and different kinds of waste.
点击查看更多
